Version: 3.2.16-SNAPSHOT

Basic Profiles

This bundle provides a list of useful Profiles.

Generic Command Profile

This Profile can be used to send a Command towards the Item when one event of a specified event list is triggered. The given Command value is parsed either to IncreaseDecreaseType, NextPreviousType, OnOffType, PlayPauseType, RewindFastforwardType, StopMoveType, UpDownType or a StringType is used.

Configuration

Configuration Parameter Type Description
events text Comma separated list of events to which the profile should listen. mandatory
command text Command which should be sent if the event is triggered. mandatory

Full Example

Switch lightsStatus {
    channel="hue:0200:XXX:1:color",
    channel="deconz:switch:YYY:1:buttonevent" [profile="basic-profiles:generic-command", events="1002,1003", command="ON"]
}

Generic Toggle Switch Profile

The Generic Toggle Switch Profile is a specialization of the Generic Command Profile and toggles the State of a Switch Item whenever one of the specified events is triggered.

Configuration

Configuration Parameter Type Description
events text Comma separated list of events to which the profile should listen. mandatory

Full Example

Switch lightsStatus {
    channel="hue:0200:XXX:1:color",
    channel="deconz:switch:YYY:1:buttonevent" [profile="basic-profiles:toggle-switch", events="1002,1003"]
}

Debounce (Counting) Profile

This Profile counts and skips a user-defined number of State changes before it sends an update to the Item. It can be used to debounce Item States.

Configuration

Configuration Parameter Type Description
numberOfChanges integer Number of changes before updating Item State.

Full Example

Switch debouncedSwitch { channel="xxx" [profile="basic-profiles:debounce-counting", numberOfChanges=2] }

Debounce (Time) Profile

In LAST mode this profile delays commands or state updates for a configured number of milliseconds and only send the value if no other value is received with that timespan. In FIRST mode this profile discards values for the configured time after a value is send.

It can be used to debounce Item States/Commands or prevent excessive load on networks.

Configuration

Configuration Parameter Type Description
toItemDelay integer Timespan in ms before a received value is send to the item.
toHandlerDelay integer Timespan in ms before a received command is passed to the handler.
mode text FIRST (sends the first value received and discards later values), LAST (sends the last value received, discarding earlier values).

Full Example

Number:Temperature debouncedSetpoint { channel="xxx" [profile="basic-profiles:debounce-time", toHandlerDelay=1000] }

Invert / Negate Profile

The Invert / Negate Profile inverts or negates a Command / State. It requires no specific configuration.

The values of QuantityType, PercentType and DecimalTypes are negated (multiplied by -1). Otherwise the following mapping is used:

IncreaseDecreaseType: INCREASE <-> DECREASE NextPreviousType: NEXT <-> PREVIOUS OnOffType: ON <-> OFF OpenClosedType: OPEN <-> CLOSED PlayPauseType: PLAY <-> PAUSE RewindFastforwardType: REWIND <-> FASTFORWARD StopMoveType: MOVE <-> STOP UpDownType: UP <-> DOWN

Full Example

Switch invertedSwitch { channel="xxx" [profile="basic-profiles:invert"] }

Round Profile

The Round Profile scales the State to a specific number of decimal places based on the power of ten. Optionally the Rounding mode can be set. Source Channels should accept Item Type Number.

Configuration

Configuration Parameter Type Description
scale integer Scale to indicate the resulting number of decimal places (min: -16, max: 16, STEP: 1) mandatory.
mode text Rounding mode to be used (e.g. "UP", "DOWN", "CEILING", "FLOOR", "HALF_UP" or "HALF_DOWN" (default: "HALF_UP").

Full Example

Number roundedNumber { channel="xxx" [profile="basic-profiles:round", scale=0] }
Number:Temperature roundedTemperature { channel="xxx" [profile="basic-profiles:round", scale=1] }

Threshold Profile

The Threshold Profile triggers ON or OFF behavior when being linked to a Switch item if value is below a given threshold (default: 10). A good use case for this Profile is a battery low indication. Source Channels should accept Item Type Dimmer or Number.

::: tip Note This profile is a shortcut for the System Hysteresis Profile. :::

Configuration

Configuration Parameter Type Description
threshold integer Triggers ON if value is below the given threshold, otherwise OFF (default: 10, min: 0, max: 100).

Full Example

Switch thresholdItem { channel="xxx" [profile="basic-profiles:threshold", threshold=15] }

Time Range Command Profile

This is an enhanced implementation of a follow profile which converts OnOffType to a PercentType. The value of the percent type can be different between a specific time of the day. A possible use-case is switching lights (using a presence detector) with different intensities at day and at night. Be aware: a range beyond midnight (e.g. start="23:00", end="01:00") is not yet supported.

Configuration

Configuration Parameter Type Description
inRangeValue integer The value which will be send when the profile detects ON and current time is between start time and end time (default: 100, min: 0, max: 100).
outOfRangeValue integer The value which will be send when the profile detects ON and current time is NOT between start time and end time (default: 30, min: 0, max: 100).
start text The start time of the day (hh:mm).
end text The end time of the day (hh:mm).
restoreValue text Select what should happen when the profile detects OFF again (default: OFF).

Possible values for parameter restoreValue:

Full Example

Switch motionSensorFirstFloor {
    channel="deconz:presencesensor:XXX:YYY:presence",
    channel="deconz:colortemperaturelight:AAA:BBB:brightness" [profile="basic-profiles:time-range-command", inRangeValue=100, outOfRangeValue=15, start="08:00", end="23:00", restoreValue="PREVIOUS"]
}